V-3.5M
價格
描述
The V3.5M is a high quality,monophonic power amplifier with built-in nine band graphic equalizer for sound reinforcement and installation. The V3.5M is also available use to bass Guitar Power amplifier.
- A minimum load as low as two Ohms
- Built-in opto control level limiter
- FET control quiet power on/off muting circuit.
- AC primary controlled full protection circuitry
- 350W at 2 Ohm 0.05% THD 20Hz~30kHz
- The front face, soft feeling rubber coated, 2U space.
Model | V-3.5M |
Single Mode (both channel driven) | Continuous Average Output |
FTC @ THD+N=0.1%, f=20Hz~20kHz | |
8 ohm | 110W |
4 ohm | 210W |
2 ohm | 320W |
EIA @ THD+1=1%, f=1kHz | |
8 ohm | 120W |
4 ohm | 220W |
2 ohm | 330W |
Power Bandwidth (Ref. 1kHz, THD+N=0.1%,+0/-1dB) |
20Hz~25kHz |
THD+N (Ref. 1kHz,f=20Hz~20kHz) |
≤0.05% |
Frequency Response (Ref. 1kHz, 1watt output, +0/-1.5dB) |
20Hz~35kHz |
IMD(SMPTE4:1) (60Hz:7kHz, 4:1 Half power) |
|
2-4-8 ohm | ≤0.1% |
Residual Noise (20Hz~22kHz LPF,Att.min) |
≥73dB |
S/N Ratio (Filter:A-Weighting, RMS) |
≥100dB |
Damping Factor (RL=8Ω, f=1kHz) |
≥400 |
Input Sensitivity (Att. max) | |
2 ohm | +4.0 dBu |
4-8 ohm | +5.1 dBu |
Voltage Gain(ATT.max) | 27.64dB |
Output Circuitry | AB |
Input Impedance | 10kΩ(Unbalance),20kΩ(Balance) |
Comp Sensitivity | +1, -0.5 at +4dbm to +20dbm |
Graphic Equalizer | 63. 125. 250. 500HZ, 1K, 2K, 4K, 8K, 16K |
Controls | AC Switch, Input gain Control knobs |
Connectors | XLR jack, 1/4" TRS Touch-Proof binding posts, Speakon jack |
Indicators | Power(Green),Comp(Amber)Protect(Red) Clip(Red) |
Protection Circuits | 1)Short Circuits 2)Current Limit 3)DC detection 4)Thermal 5)Turn On/Off muting 6)AC Line fuse |
Fan Circuit | Single Fans Variable low speed (50℃), Varable, High speed(55℃) |
Power Consumption | 680VA |
DIMENSION | 480mm X 88mm X 247mm |
Weight | 12kg / 26.45 Ibs |